BNDMF - L225, 2-ETHOXYETHYL ACETATE
- MSDS: BNDMF
- Manufacturer: J T BAKER INC
- Product Name: L225, 2-ETHOXYETHYL ACETATE
- National Stock Number: 6810-00N029720
Product Identification
Product ID:L225, 2-ETHOXYETHYL ACETATE
MSDS Date:08/28/1986
FSC:6810
NIIN:00N029720
MSDS Number: BNDMF
Responsible Party
PHILLIPSBURG, NJ 08865-2219
US
Emergency Phone: 908-859-2151;800-424-9300(CHEMTREC)
Info Phone: 800-582-2537
Cage: DO803
Contractor
Telephone: 800-582-2537
Cage: 70829
Ingredients
ETHANOL, 2-ETHOXY-, ACETATE; (CELLOSOLVE ACETATE)
CAS: 111-15-9
RTECS: KK8225000
Fraction By Weight: 90-100%
OSHA PEL 100 PPM, S
ACGIH TLV: 5 PPM, S
Hazards
LD50 LC50 Mixture:LD50: (ORAL,RAT) 2900 MG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION OF VAPORS MAY CAUSE SEVERE
IRRITATION OF RESPIRATORY SYSTEM. LIQUID IS READILY ABSORBED
THROUGH SKIN. PROLONGED CONTACT MAY CAUSE SKIN IRRITATION. LIQUID
MAY CAUSE BURNS TO SKIN AND EYES. I NGESTION MAY CAUSE NAUSEA,
VOMITING, HEADACHES, DIZZINESS, GASTROINTESTINAL IRRITATION.
CHRONIC EFTS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: OF OVEREXPOSURE MAY INCLUDE KIDNEY
AND/OR LIVER DAMAGE. NIOSH RECOMMENDS THAT 2-ETHOXY ETHYL ACETATE
BE REGARDED IN WORKPLACE AS HAVING POTENTIAL TO CAUSE ADVERSE
REPRODUCTIVE EFFECTS IN MAL E AND FEMALE WORKERS .
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.
First Aid
First Aid:CALL PHYSICIAN. INGESTION: IF CONSCIOUS, IMMEDIATELY INDUCE
VOMITING. INHALATION: REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE
ARTIFICIAL RESPIRATION. IF BREATHING IS DIFFICULT, GIVE OXYGEN.
EYES: FLUS H WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES. SKIN:
FLUSH WITH WATER.
Fire Fighting
Flash Point Method:COC
Flash Point:117F,47C
Lower Limits:1.7%
Upper Limits:6.7%
Extinguishing Media:USE WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL OR
ORDINARY FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. MOVE CONTAINERS FROM FIRE AREA IF IT CAN BE DONE W/OUT RISK. USE
WATER TO KEEP FIRE-EXPOSED CNTNRS COOL.
Unusual Fire/Explosion Hazard:VAPS MAY FLOW ALONG SURFS TO DISTANT
IGNITION SOURCES AND FLASH BACK. CLOSED CONTAINERS EXPOSED TO HEAT
MAY EXPLODE. CONT WITH STRONG OXIDIZERS MAY CAUSE FIRE.
Accidental Release
Spill Release Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT CLTHG.
SHUT OFF IGNIT SOURCES; NO FLARES, SMOKING/FLAMES IN AREA. STOP
LEAK IF YOU CAN DO SO W/OUT RISK. USE H2O SPRAY TO REDUCE VAPS.
TAKE UP W/SAND OR OTHER N ON-COMBUST ABSORB MATL & PLACE INTO (SUPP
DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. STORE
IN COOL, DRY, WELL-VENT, FLAMMABLE LIQUID STORAGE AREA OR CABINET.
ISOLATE FROM INCOMPATIBLE MATERIALS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:RESPIRATORY PROT REQD IF AIRBORNE CONCENTRATION
EXCEEDS TLV. AT CONC UP TO 2500 PPM, A NIOSH/MSHA APPROVED CHEMICAL
CARTRIDGE RESP W/ORGANIC VAPOR CARTRIDGE IS RECOMMENDED. ABOVE THIS
LEVEL, A NIOSH/M SHA APPRVD SCBA IS RECOMMENDED.
Ventilation:USE GENERAL OR LOCAL EXHAUST VENTILATION TO MEET TLV
REQUIREMENTS.
Protective Gloves:BUTYL RUBBER GLOVES.
Eye Protection:CHEM WORK GOG & FULL LGTH FACESHLD
Other Protective Equipment:UNIFORM, PROTECTIVE SUIT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
SPILL PROC: CONTAINER FOR LATER DISPOSAL. FLUSH AREA WITH WATER.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:313F,156C
Melt/Freeze Pt:M.P/F.P Text:-80F,-62C
Vapor Pres:2.0
Vapor Density:4.7
Spec Gravity:0.97 (H2O=1)
Evaporation Rate & Reference:0.21 (BUTYL ACETATE=1)
Solubility in Water:APPRECIABLE
Appearance and Odor:COLORLESS LIQUID WITH PLEASANT ODOR.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS, STRONG BASES, NITRATES.
Stability Condition to Avoid:HEAT, FLAME, OTHER SOURCES OF IGNITION.
Hazardous Decomposition Products:CO, CO2.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE, AND LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.